Pages

June 25, 2011

how to get the teeth (grooves) of the belts

I'm after some color belts for my '94 YZ10 runner. but didn't know the teeth of the front belt. so.......... I counted it myself.
it had 170 teeth on it. but I needed to make sure. it could be 169 or 171 if I made a mistake. so I checked the length. it's a circle you know, so I had to fold it, and got 254mm length. but this still could be wrong 'cuase the belt is not a thin paper. the actual length should be longer than 254mm

254 x2 = belt length = 508
we know the pitch is 3mm
508/3 = 169.333333333

so I tried 255mm
255 x 2 = 510
510/3 = 170

then got a conclusion 510mm is the right length. but this turned to a bad joke. there was already 510 written on the belt

510 3M 3.5
length 510mm
pitch 3mm
width 3.5mm

the answer was right in front of me. but didn't know it before my hard labor. rear belt is 64T btw




June 12, 2011

got the hex hubs from pargu

acutally got the hubs weeks ago. but didn't have chance to post this

http://cgi.ebay.com/Associated-RC10-wheel-hub-set-RC10-1-4-alxes-/140550780224?pt=Radio_Control_Vehicles&hash=item20b97ab540




related posts:
http://59burst.blogspot.com/2011/05/hex-adapter-for-rc10-14-axles.html
http://59burst.blogspot.com/2010/12/rc10-axles-and-wheels-1.html

June 4, 2011

Lohas wheels

will add more pics later